Walking Foot Double Needle Highlead GC20618-2 Heavy Duty Sewing Machines-Industrial Sewing Machines

Walking Foot Double Needle Highlead GC20618-2 Industrial Sewing Machines Only Three Available! This is the two needle compound feed version of the GC20618 series. An automatically lubricated machine - it uses two large vertical axis rotating hooks and a sliding bar thread take up to form crisp stitches. Needle bearings...

Juki Long Arm Walking Feet-Compound Feed LU-2216N-7 Heavy Duty-Leather Sewing Machines-Industrial Sewing Machines

Juki Long Arm Walking Feet-Compound Feed LU-2216N-7 Heavy Duty-Leather Sewing Machines DEMA Industrial Sewing Machines Based on the market-proven design of the Juki LU-2210N-7 and -2260N-7 Series, the LU-2216N-7 is developed with a longer distance from the machine arm to needle... a full 650mm. The long arm unison feed lockstitch...

Long Arm Cylinder Bed Extra Heavy Duty Walking Foot Compound Feed Lockstitch-Industrial Sewing Machines

Long Arm Cylinder Bed Extra Heavy Duty Walking Foot Compound Feed Lockstitch- Sewing Machines DEMA Industrial Sewing Machines A 37 inch long arm cylinder bed compound feed lockstitch machine for extra heavy duty work. The Japanese made large shuttle hook and large bobbin capacity offer high efficiency and ease of...

Cylinder Bed Extra Heavy Duty Walking Foot Compound Feed Lockstitch GA2688-1- Industrial Sewing Machines

Cylinder Bed Extra Heavy Duty Walking Foot Compound Feed Lockstitch GA2688-1-  Sewing Machines DEMA Industrial Sewing Machines This extra heavy duty top and bottom feed lockstitch machine comes with a high arm clearance and extra wide bed to make it easy to sew large articles. The large machine pulley helps...

Highlead Single Needle Losckstitch GC-128-Industrial Sewing Machines

Highlead Single Needle Lockstitch GC-128- Sewing Machines DEMA Industrial Sewing Machines This series high speed lockstitch machine uses a link type feeding mechanism, link thread take up and rotating hook to form clean, crisp stitches. Bevel gears that drive the arm shaft and hook in combination with the dial operated...

XC-CVS-2

Variable-speed Pedal * Variable speed operation is possible with standing work, enabling full utilization of functions for stitching corners and curve sections, etc. * Variable speed operation following the degree of pedal heeling is possible. * External signals for the thread trimmer, and presser foot lifting, etc., can be operated...